Minto Sailboat Mooring Cover - Mast Up Flat Cover

Overview:

The Minto (by Ranger)* Mast Up Flat Mooring Cover fits snugly below the rub rail of the hull to seal out dirt and water. 

This cover is installed with the mast up and the spars and sail down. This cover is held on by an elastic cord in the hem of the cover; there are also tie down points about every three feet around the cover. There is a cutout for the mast that has a tall tie-on collar; the mast cutout is connected to the side of the cover with a large #10 YKK zipper between the mast cutout and the starboard gunwale. The zipper is also covered with a flap of fabric to increase UV resistance. The spars and sail that protrude off the back of the boat are covered with an attached Velcro on flap that wraps around the spars, protecting your spars and sail from UV damage.   

We offer this cover in three different fabric types, look over the fabrics in the drop down chart below.

Notes: 

Product images are not of an actual Minto and are for reference only. Photos coming soon. 

All of our covers are patterned from the actual boats they are designed to fit. This make for a better, higher quality product. 

*This cover is intended to fit a Minto by Ranger. Please contact us if you have a Minto by Whitehall or Rich Passage. 

Additional Info:

CLICK HERE TO VIEW OUR BOAT COVER CLEANING AND CARE GUIDE