FlipPac Rain Fly - 210 Denier Nylon

Overview:

After owning a FlipPac and considering the needs of overland campers (in a variety of climates) we designed a fully customizable FlipPac Rain Fly! 

The standard FlipPac RainFly will come with four 8 ft. long, 1 inch wide webbing straps with two 1 inch triglide buckles.  Two of the webbing straps with triglides are designed to be run from the back corners of the fly down to the bumper. The remaining two included straps are designed to go under the open lid from one side of the fly to the other. 

The fly also comes standard with four vents—one on each end and one on each side. Additional vents and clear vinyl windows can be added for an additional cost. You will still get the standard 4 straps and 2 triglides but you can add an additional strap kit that contains 4 more 8ft straps and 4 more triglides for an additional cost. Unless your fly will be regularly used in a hot or humid climate, we suggest ordering the standard fly with two windows. For hot or humid climates, we recommend adding two vents.

Features:

• Reinforced corners for durability
• A series of loops and ladderlocs around the bottom edge of the fly all the way around the truck allowing for a variety of tie-down options. They can be used to strap the fly to itself under the lid, to the vehicle, or to the ground or surrounding trees, tables, rocks, etc...
• The fly has a bungee cord around the bottom edge of the fly to fit snuggly against the shell.
• Symmetrical design makes installation easy (this means you can't install the cover backwards)
• Custom made in the color and configuration of vents and windows of your choice
• We have four vents on the fly with removable battens, meaning the fly can be rolled up quickly and easily without worrying about breaking the battens.
• Packs down tight into a small duffel - included.
• Weighs <10 lbs in its 8” x 24” zippered duffel.
• Manufactured using 210 Denier, urethane-coated Nylon. Seams are sewn twice, stitched with an extremely high-tensile-strength and abrasion-resistant V-92 Polyester thread.
• Comes in five color options - see below: Charcoal, Forest Green, Royal Blue, Texas Tan, and Silver. *Colors may vary slightly from graphic below.*
• Most importantly, SLO Sail and Canvas custom manufactures quality products in the USA.

Includes (standard):

• (4) 8' X 1" wide Webbing Straps with (2) 1" Tri-Glide buckles
• (4) Vents

Optional Upgrades:

• (4) additional 8' X 1" wide Webbing Straps with (4) additional 1" Tri-Glide buckles
• (2-6) additional windows, and /or (2) additional vents

Notes: 

• Our Flip-Pac Rain Fly is not seam sealed. You can seam seal the fly yourself using any commercially available seam sealer designed for tents.  
• All FlipPac tents are the same size, only the fiberglass shell changes size with the size of the truck bed.  This means that our FlipPac rainfly will cover all FlipPac tents no matter what truck you have.