AlphaCat 18 Catamaran Trampoline - Bias Cut Mesh

Overview:

We have spent lots of time developing this Alpha Cat 18 bias cut trampoline to our high quality standards.

Our heavy-duty mesh trampoline is very well built with these unique features:

• Bias cut one-piece design for uniform tension
• Rear lacing only with built in rear linecatcher
• 12 x 12" halyard pocket near the mast base
• Adjustable hiking straps
• Heavily reinforced with 3" wide heavy-weight polypropylene webbing in rear grommet areas
• At least five rows of stitching in high-load areas (compared to 2 rows from other manufacturers)
• Made of high-quality and very durable trampoline black mesh (8oz. polypropylene basket weave mesh)
• Sewn with large size V-138 UV-stabilized polyester thread
• We personally pounds each #4 spur grommet by hand (spur grommets are tough; they have 'teeth' that bite into the fabric

Required Info:

Provide the dimension from the outside of the trampoline to the center of the forward-aft support tubes.  Our stock trampoline has these tubes centered at 22.5" from the outside of the trampoline.  If your boat measures differently, we will build your trampoline accordingly.

Provide the trampoline attachment method (hooks or sail slides) for the aft cross beam.

Note:

Please measure your boat. We are not liable for shipping you the wrong trampoline if you don't measure!

Includes:

• One-year warranty against defects in materials and workmanship
• Halyard Pocket
• Hiking Straps

Available Options (at an extra cost): 

• Tenara Teflon Thread - By adding this option to your trampoline order we'll sew your new SLO Sail and Canvas trampoline in Tenara Teflon thread by Gore. Tenara has a 15 year warranty in the sun. If you store your boat on the beach this is the best thing you can add to extend the life of your trampoline. Our standard thread is a V-138 polyester thread that is UV stabilized and will last 5-7 years+ in the sun. 
• Zippered Pocket - A larger zippered pocket perfect to hold water bottles, lunch, or sunscreen. The pocket dimensions are roughly 15"x18" and 4" tall. Dimensions may vary slightly depending on the trampoline because of other things getting in the way of a bigger pocket such as hiking straps and lacing grommets, trapeze grommets, jib strop grommets etc. We put the pocket inboard of the hiking straps on Hobie 14 and Hobie 16's on the starboard side of the trampoline. Prindle trampolines will have the zippered pocket on the port side of the trampoline inboard of the hiking straps and opposite the standard halyard pocket we include on all trampolines.
• Lace Kit - Pre cut 1/4" (and sometimes 1/8") line to lace up your new trampoline. Available in white or black.

Additional Info: 

CLICK HERE to learn more about Tenara Teflon thread.

Prev Next